Wednesday, August 27, 2025

Camera Craft ~ March 1934 ~ Venus And Vulcan William Mortensen An Essay On Creative Pictorialism Interpretations Of Reality

Saint Ansel, Bohemian Ed Weston, Morely Baer, and others heavily influenced me while I was growing up in southern California.  When Saint Ansel wrote something, I took it at face value and didn't really question why he wrote what he did.  So when he wrote that "straight" photography was better than anything William Mortensen did (naming names, even) I immediately thought Mortensen was in the wrong and his photography was of little to no value.  Further, emulating St. Ansel's techniques and choosing the photography tools he chose seemed to me the best way to proceed.  Period.

Years later I learned the photographic world is much more subtle than I originally took it for.  I began to appreciate some of William Mortensen's images and started reading through his early Camera Craft books on lighting, modeling, and processing.  Over the years I've wondered a bit about the tension between Adams and Mortensen and could never get to the bottom of it.  Group 64 had their position and my little world didn't seem to tolerate any different approach.

That's how it appeared to me, at least.  Living on the west coast of the US was a very limiting, narrow experience.  It was rather arrogant of me, really.

Moving out of the US has had the fortunate effect of teaching me just how broader and wider the world of photography actually is.  There are as many approaches to seeing the world and creating unique images as there are photographers pursuing the practice.  It seems all so obvious to me, now, but my own borrowed/adopted narrowness got in the way.

Recently I've worked to expand my knowledge of photographers and their contributions to the craft.  In the process I stumbled upon a nice collection of pdf files on archive dot org of the early Camera Craft publications.  The very first one I read contained a few articles and letters to the editor that I'm finding utterly fascinating.  It contains a portion of the history of how photography was still evolving in 1934 and provides pointers to where the schism between St. Adams and William Mortensen originated.

What I'm doing here is providing an article, copied and pasted from a pdf written by William Mortensen that talks about different approaches to photography, and why he feels more value in some and not others.  Mortensen provides a critique of soft focus lens use in Pictorial works which is sometime Group 64 seems to have completely ignored.  This is perhaps because he provides a direct and strongly worded critique of Group 64.  It must have caused a fair amount of gnashing of teeth and wagging of fists and I  will share two letters to the editor written by Willard Van Dyke in a future post. 

Saint Enogat ~ Dinard ~ 2025 

---------------------------- 

Venus And Vulcan ~ William Mortensen
An Essay On Creative Pictorialism Interpretations Of Reality

In the days when the world was young and humanity was still in the period of its innocence, Art (if we are to believe Spengler and other philosophers of history) was the result of instinctive and intuitive reactions of joy, fear, and wonder.  But, we are told, when the serpent of Sophistication crept into this paradise, man turned crafty and knowing, and Art became calculating, self-conscious, and decadent. Judged on this basis, photography, as the youngest of the arts, is showing clear signs that it is about to doff its pinafore and enter into a swash-buckling, hell-raising adolescence. Among these signs we may note an increasing number of discussions (of which this is one) of the true end and significance of photography. It is evident that a spirit of healthy dissension is abroad in the ranks of photographers, and that where once their one thought was to stand together against the jeers of other arts, they have now sufficiently found themselves to form inner alignments, parties and schools.

When Dr. Draper in 1840 posed his sister under the noonday sun and focused his weird contraption of lenses and chemically treated plates upon her for twenty minutes, he probably had no intimation of the awful consequences of his act of taking the first photograph of a human countenance. To Dr. Draper and the other pioneers photography was a scientific issue merely, complicated by almost insuperable technical problems. It was as a scientific curiosity that the camera made its first public appearance. For years the simple wonder of the fact that this instrument was able to record the simulacrum of everything that its glassy eye beheld was enough to justify it. But soon, even in its quite primitive state, the camera made known its unexampled facility for recording and documenting events; and this was the second stage in its evolution. Then appeared the portentous phenomenon of a man named Eastman. His is the heavy responsibility of making the camera popular by putting it and photographic materials within the reach of everyone. There ensued the era of the "snap shot."  Irresistible, indefatigable Kodak army swept round the world, from Eiffel Tower to Matterhorn, from Karnak to Taj Mahal, and wherever they went there was a tremendous clicking of shutters. Events and persons far better forgotten were given a fearful immortality.  And this was the third stage.

Early in the snap-shot era the development of photography reached its fourth phase. To the accompaniment of jeers, groans and catcalls from the practitioners of the older graphic arts first London Photographic Salon timidly made its bow forty years ago. That this young upstart, this scientific toy, the camera, should dare to artistic pretensions, was to painters, etchers, lithographers, a jest of epic proportions. And to tell the truth there was much justice in their merriment, for the early salons were mostly shots. made up of pictures that were in essence simply superior snap-shots. But amongst them all were a few prints that, by reason of their imaginative quality, stood out against the Olympian laughter of the Academicians.

Aside from the manifest shortcomings of taste and artistic training betrayed by the first salons, the thing that most drew the fire of critics was the essentially mechanical nature of the camera itself. "The camera is merely a recording instrument," they said, "and has no more to do with art than a thermometer or a stethescope. It is like an idiot's eye: it sees
everything and is incapable of saying anything about it." Stung by this rebuke, the early pictorialists began doing everything in their power to conceal the clean lines of their images. They diffused their pictures till all their forms sprouted whiskers of cotton wool. They indulqed in various ill-advised efforts to imitate paintings of the boudoir school. They abused the gum-bichromate process so that their pictures lost all sense of definition and most of the half-tones.

Despite the many departures from good taste and good sense and the uncertain technique of these pioneers of pictorialism, the quality of the work exhibited in the salons gradually took on substance and dignity, the clamour of the critics became less strident, the public became more generous in its recognition, and what was most important, the photographers shed their crushing inferiority complexes and began to take candid stock of themselves. And at this point, which is coincidental with the last few years, photography entered into its fifth phase. Pictorialists, no longer obsessed by what other artists thought of them, began to give consideration to the implications, functions and aims of their own art. Should photography be imitative, representative or expressive? What is the importance of technique?  What of processes that are not strictly optical, mechanical and chemical?

 The effort to answer these and similar questions revealed a wide divergence of opinion and gave rise to corresponding divergence in practice.  No longer is it possible to classify a photographer as simply good or bad, as a portrait photographer, or as a maker of landscapes.  For there are now evident several distinct schools of thought and procedure
in the pictorial field.

The fundamental division between these schools seems to be based on their varying methods of dealing with reality. Reality the substantial world of shapes and colours, lights and darks, people and personalities, with which we are surrounded is the material with which all graphic artists must deal. In grappling with this raw reality artists resort to
various methods. To some of them Reality is something to be embraced: to others, something to be moulded; and to still others, something to plunge into and pass beyond.

The first method we may call because it frankly embraces reality-realistic.  The realist takes the world as it is. and is damn proud of the fact. The essence of his method is non-selectiveness. All things that choose to record themselves on his negative are equally sacred. Choice of subject is of no account to him; it is the completeness and literalness of
rendition that matters. He lays great stress on the "photographic" quality of his photographs: that is to say, he strives, by all the resources of fine lenses, filters, long exposures with reduced aperture, and super-sensitive film to get onto the negative every thing recordable in the subject, and by means of a contact print on glossy paper to give a complete and objective replica of it.

The principal exponents of this manner of working are Americans, and the chief stronghold of the school is the Pacific coast. One phase of their peculiar technique led to their being tagged the "F. 64 group", a convenient and concise appellation which they themselves have not disowned.

Tested by its results this school fluctuates between commendable sincerity and deplorable taste.  I attribute its present vogue to a healthy reaction against the weakly romantic and sentimental trend of early pictorial photography. Its adherents are outspoken and obviously honest in their belief that photography culminates and fulfills its destined function in their movement. They have a clearly reasoned and consistent idealogy and, more than any other group, have recognized and defined their objective. However, my own feeling is that they have set out to harrow a very sterile and unfertile field, and that they will speedily exhaust its possibilities.  Though their technical accomplishments are noteworthy, the ideal they have set up of complete literal recording is a very primitive one.  A good beginning but not an end in itself.  What they offer is a
discipline, and an excellent one; but so far they offer nothing beyond the discipline.

To the practitioners of the second method of coping with reality the material that the world affords respecting it is something to be dealt with creatively, as the sculptor respects the tough marble under his chisel, but not permitting it to dictate the bargain.
The "thing-in-itself" is of no account save as a vehicle of expression. Hence the forms, the lines, the details are all subject to significant simplification and alteration in order that the picture-idea may more clearly express itself. Hence all striving for greater and greater detail, all straining to capture subtleties of tone and texture, even all searching after refinements of technique, are in themselves completely irrelevant to the making of pictures. To the adherent of the Non-realistic, creative manner of working, the finished picture is the be-all and end-all, its own aim and its own justification.

The Classic and Romantic are simply variants of the non-realistic method. Although these two are traditionally represented as diametrically opposed in all respects, they are in fact much closer to each other than they are to the position of the Realist. Their similarities are much more numerous and much more significant than their differences. One may say
that the Classic represents the impersonal, passive aspects of the non-realistic school, and the Romantic, the personal, active aspects.

The classic stripping method subordinates the personality of the away all excrescences of time and place, artist, and, exalts the timeless, universal qualities of the subject. Details and textures are swallowed up in the large conception of the whole. Even where action is indicated there is a sense of repose and balance.  Though classic art may find its subjects
everyday life, it stands above the turmoil, remote and austere. Dealing with familiar things, it does not invite familiarity. Egyptian, archaic Greek and, above all, Chinese art typify the classic spirit. But not all the classicists are dead by any means. Echague, the great Spanish pictorialist, is pre-eminently a classicist in thought and method.

The romantic method, on the other hand, exults in the personal quality of the artist's idiom. Rather than exercising restraint, it glories in the exuberant outpouring of forms and ideas. Rich, strong contrasts, both in subject matter and execution, lend a note of excitement. The expressive qualities of line and mass are exploited to the utmost, and the
Grotesque becomes important. Transitory moods and fleeting emotional impressions are emphasized. It is recognizably our world that Romance deals with, but luminated with strange lights.

One misguided and now nearly out-dated manifestation of the non-realistic method in photography needs to be mentioned if only to disown it.  This is the Fuzzy-Wuzzy school of twenty years ago. Early pictorialists, distressed by the literalness of the camera, seized with avidity on the soft-focus lens as a means of suppressing irrelevant detail and secur-
ing breadth of effect. Unfortunately, relevant detail was equally suppressed, and the effect was not only broad, but mushy. Soft-focus is still occasionally resorted to; but, now as then, fuzzy forms, indeterminate outlines, emasculated angles, and a weakly sentimental atmosphere are the inevitable results of its use, owing to the essentially non-selective character of diffusion.

What the non-realistic seek is not diffuseness, but increased clarity of expression.  To accomplish this, forms must be simplified or exaggerated, certain lines must be given significant movement, tonal contrast must be effectively placed, distracting detail must be suppressed. All this means selection. So the adherents of the creative school will for all
stages of photographic procedure choose the equipment, material, and processes that are most susceptible to control; for it is through control that selection is achieved.

Recent German publications have hinted at a third method of dealing with reality, one in which the unquestionable high technical attainments of the realists may find their logical outlet. The accomplishments of this method at present practiced only by a small group of German photographers are sometimes credited to the F.64 school, but these accomplishments represent a different and more significant departure.

This new method has been made possible by late developments and refinements of optical equipment. I have chosen to call the method "Meta-realistic", because it does not stop with the world as we know it, but plunges into it and passes beyond it into a new world of beauty and fantasy. The camera has a unique capacity for seeing further into a thing than the eye does and discovering refinements of texture, differences of tone, and tiny hidden patterns that neither the casual eye of the average beholder nor the searching eye of the artist suspected were there. The normal eye has a range of sensitivity that extends from the slow vibrations of the red rays to the high speed of violet. The camera makes visible violet even the extremely slow vibrations of moderate heat, and on the end of the spectrum reaches far beyond the eye's capacity.

While these are not things that lie within average human experience, they are nevertheless capable of arousing aesthetic emotion. The thought that there are unsuspected universes within our grasp, limitless fields of exploration no further away than the ends of our noses, is like a cold wind blowing from the spaces between the stars, causing us to dream and to wonder. And so it happens that the work of the Meta-realists is pervaded with the same "strangeness added to beauty" that distinguishes the best work of the Romantics.

At present the only exponents of the true Meta-realist procedure are a  few German photographers. They push their optical equipment to strange extremes, not to reveal unimportant detail, nor as a mere technical stunt, but because the result is beautiful. In Das Deutsche Lichtbild, patterns of dew 1933, are published numerous examples of their work drops on grass blades, spider webs, amazing forms of plant growth opening to us a realm of a new kind of beauty, magic and unearthly. The Meta-realists represent a phase of pictorial photography whose very existence is barely glimpsed, and whose potentialities are at this time unpredictable.

---

When the foam-borne Venus, goddess of beauty, came to high Olympus, Jupiter, in his quaint way, married the lovely creature to Vulcan the blacksmith. To the superficial critic this union might appear a sad mesalliance; but, by all accounts, the match panned out very well. To be sure, there were a few fearful rows when she called him a dull-witted
yokel that didn't appreciate her, and he denounced her as a frivolous, irresponsible hussy, but on the whole they got along very amicably. Unquestionably she brought light and a new meaning into his dark existence, and he bent all his skill at the forge to fashion jewels for her adornment.

The wedding of Technique to Aesthetic Impulse is a difficult problem.  Technique is apt to be over-earnest and self-assertive, and has been known to claim that he married A. I. only in order to make an honest woman of her, a statement which she justly resents.  She, in her turn, has sometimes compared her family to his family to the great detriment of the latter. Each has on various occasions packed up and walked out on the other, but they just don't seem to be able to get along without each other.

To study the contemporary relations of this quarrelsome couple will be the object of further articles of this series. A permanent reconciliation may be too much to hope for, but it should be possible to establish a basis for better future understanding.

This is the first of a series of five articles by Mr. Mortensen.  Next month he will write on the "Sources and Uses o[ Material". Ed.

Monday, August 25, 2025

Digital Zone System ~ Sony A6000 in-camera Black and White jpg generation

Here's yet another look at in-camera jpg generation and a black and white Digital Zone System.  This time I'm considering a Sony A6000.  It came with a Bionz X ASIC just like the A5000.  So I expect very few differences between the A6000 and A5000.

I believe it's worth repeating something I see about my little APS-C Sony Cameras.  Sony seems to indicate two 0EV settings, 0.3EV apart.  The metering system tells me when 0EV is reached, but then if I go 0.3EV further, the meter STILL reads 0EV.  

Often the lower 0EV indicated is the one that matches the Zone 5 specification (#76/118(dec)).  Then I use that value as the starting point and increase/decrease exposures using that as the Zone 5 reference/starting point.  

In practice, some of my Sony cameras matrix meter to the lower 0EV, while others meter for the upper 0EV.  I find this a bit strange but it might fit with whatever industry standards there are for metering (ie: +/- lee-way, or somesuch).  Curiously, I've not seen this metering variability on full frame Sony.

Sony A6000 ~

Varying Creative Style Black and White Contrast as well as Dynamic Range Optimization (DRO), here's what I see.  The upper Step Wedge is the synthesized reference. 

Zone System ~ Sony A6000 Contrast 0 DRO 3 0EV

Zone System ~ Sony A6000 Contrast 0 DRO3 -0.3EV

Zone System ~ Sony A6000 Contrast -1 DRO 3 -0.3EV

Zone System ~ Sony A6000 Contrast -1 DRO 3 0EV

 

It is easy to re-confirm that -

  • Contrast changes highlights as well as shadows (as expected)
  • DRO raises the dark tones up to Zone 5 to varying degrees depending on DRO "strength" ~ the effect is to "open the shadows" to varying degrees while still doing _nothing_ to the highlights

In the wild: The recipe I've come to like when out and about photographing in old traditional 6:1 contrast ratio scenes is simply this:

  • Creative Style Black and White Contrast == 0 
  • DRO == 1  


-------------- References From Prior Posts ---------------

Zone System Definition ~

  • Zones are separated by 1 f-stop/1 Exposure Value (EV)
  • Zone 5 ~
    • old film days == 18% gray
    • digital tone value == #76(hexidecimal)/118(decimal)
  • Pure Black
    • old film days == Zone 0 at -5EV
    • digital tone values == -EV-whatever the camera system can deliver (commonly different between RAW - ideally -10EV!!!  and the in-camera jpg generator - Sony Creative Style Black and White in-camera seems set at -5EV)
  • Pure White
    • old film days == Zone 10 (last definition) or Zone 9 (earlier definition)
    • digital tone value == +4EV  as Zone 9 for the Sony cameras I own (this has been measured and is very important! to successfully using the Zone System in digital)

Digital Zone System In-Camera jpg Step Wedge generation ~ 

To evaluate in-camera jpg generation here's the method I used to create a Step Wedge that I could visually inspect to when making various in-camera parameter changes -

  •  Sony camera settings - 
    • ISO == 100
    • Creative Style B&W
    • B&W Contrast to a test value - I've tried -3 to +1
    • Dynamic Range Optimization - Off or DROx where x == [1, 2, 3]
    • Meter to Spot
    • Output file == jpg 
    • Manual focus and defocus the lens as much as possible to fully blur the scene (wanting just tone, no texture) 
  • Using an evenly lit surface (piece of paper, wall, etc)...
  • Take two photos at 0EV and verify which 0EV setting gives exactly #76/118(dec) in the center (where the Spot meter metered) by measuring the tonal value using an image processing software on a computer.  This will be Zone 5 per definition.
    NOTE: Sony seems to offer two 0EV settings that are 0.3EV separated on their APS-C cameras.  I've found the system tells me when 0EV is reached, but then if I go 0.3EV further, the meter STILL reads 0EV.  Often the lower 0EV indicated is the one that matches the Zone 5 specification.  Then I use that value as the starting point and increase/decrease exposures using that as the reference/starting point.  Using the lighter 0EV value over-exposes by 0.3EV (as expected) even though it readss 0EV on the display.  In practice, some of my Sony cameras matrix meter for lower 0EV, while others meter for the upper 0EV.  I find this strange but it might fit in with whatever industry standards there are for metering (ie: +/- lee-way, or somesuch).  I've not (yet?) seen this on full frame Sony.
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 6 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 7 the tonal value as read on a computer 
  •  Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 8 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 9 the tonal value as read on a computer
    • Verify that this tonal value is exactly or very very nearly Pure White
  •  Returning to Zone 5/0EV... lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 4 the tonal value on a computer 
  •  Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 2 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 1 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 0 the tonal value on a computer - this should record as #00/00(decimal), Pure Black

In practice, older/early Sony mirrorless cameras only provide +/-3EV on the exposure wheel.  In these cases I use "M" (Manual) mode, set the aperture and ISO, then vary the shutter speed by 1EV up/down the test range.  On more recent cameras where +/-5EV is available on the I set the system to "S" (Shutter) mode, set the ISO, then vary the EV by 1EV using the exposure wheel.  Why Sony allows +5EV is beyond me, but that's a topic for another time (noting that +5EV is 1EV ABOVE completely and utterly saturated pure white). 

Default Creative Style Black and White as Dreck! ~

Sony Creative Style Black and White ~ Contrast = 0 

Note how the Creative Style Black and White curve in red
takes a dive below Zone 5/0EV.  This is what I think the
"cool kids" would call "crushing the blacks."  I find the
effect to be absolute dreck.  It should be noted that 
this was a creative decision taken by Sony some time 
back and there must've been valid reasons for doing
things this way. 


Notes On USE: In a practical sense I find Zones 3 through 7 to be the most important.  If those are as close to 1EV separated as possible, then I like the output.  This is very similar to what I experienced back in the film days.

For the shadow areas I find I prefer Zones 0 through 2 to be rather outside the 1EV separation definition.  This matches film curves more closely and since I'm used to that I like a certain combination of Contrast and DRO settings.

For the highlights I like to make them "sparkle" if I can.  I find I prefer Zone 8 to be pushing closer to Pure White than not.  Having just written that, however, I shot an entire series of in-camera generated images that pleased me using nothing but Contrast == -3.  So it's worth testing different combinations of Contrast and DRO to see what works best for oneself.

Sunday, August 24, 2025

Digital Zone System ~ Sony A5000 in-camera Black and White jpg generation

Moving from silver halide film to digital over fifteen years ago I'm surprised how long it's taken me to sort out a Digital Zone System.  I'd used the Zone System for everything I shot on film and was very used to the process and how it guided results.

For whatever reason I made a long series of assumptions about how digital behaved and what manufacturers provided.  I'd turned over my thinking and reasoning to others and feel now that I missed an opportunity to successfully transition from the old Adams/White Film Zone System to a Digital Zone System. 

Using digital image processing tools, mousing over an image and using "curves" can show rather precisely where on the curve various parts of the moused over scene are.  

I knew this from Day One many years ago.  Yet I didn't realize nor understand how useful this actually is.  I must be slow and that's all there is to it.  Now that I'm "here" I can move forward using knowledge and accuracy, even as I'm still shaking my head at my ignorance.  

Zone separation by 1 f-stop/1EV applies just as well to digital as it does on film, and with better accuracy, too.

Turning my attention to a Sony A5000...  it comes with a Bionz X ASIC that offers additional features over the Bionz ASIC used in, for example, the Sony NEX-5T.  I was interested to see if there were any obvious changes/updates to how the newer ASIC treated Creative Style Black and White in-camera processing. 

Sony A5000 ~

Varying Creative Style Black and White Contrast as well as Dynamic Range Optimization (DRO), here's what I see.  The upper Step Wedge is the synthesized reference.

 

Zone System ~ Sony A5000 Contrast 0 DRO 2 0EV

Zone System ~ Sony A5000 Contrast 0 DRO 3 0EV

Zone System ~ Sony A5000 Contrast -1 DRO3 0EV 

As with the Sony NEX-5T Bionz ASIC, the A5000 Bionz X ASIC shows that -

  • Contrast changes highlights as well as shadows (as expected)
  • DRO raises the dark tones up to Zone 5 to varying degrees depending on DRO "strength" ~ the effect is to "open the shadows" to varying degrees while still doing _nothing_ to the highlights

In the wild: Here's the recipe I've come to like when out and about photographing in old traditional 6:1 contrast ratio scenes:

  • Creative Style Black and White Contrast == 0 
  • DRO == 1  


-------------- References From Prior Posts ---------------

Zone System Definition ~

  • Zones are separated by 1 f-stop/1 Exposure Value (EV)
  • Zone 5 ~
    • old film days == 18% gray
    • digital tone value == #76(hexidecimal)/118(decimal)
  • Pure Black
    • old film days == Zone 0 at -5EV
    • digital tone values == -EV-whatever the camera system can deliver (commonly different between RAW - ideally -10EV!!!  and the in-camera jpg generator - Sony Creative Style Black and White in-camera seems set at -5EV)
  • Pure White
    • old film days == Zone 10 (last definition) or Zone 9 (earlier definition)
    • digital tone value == +4EV  as Zone 9 for the Sony cameras I own (this has been measured and is very important! to successfully using the Zone System in digital)

Digital Zone System In-Camera jpg Step Wedge generation ~ 

To evaluate in-camera jpg generation here's the method I used to create a Step Wedge that I could visually inspect to when making various in-camera parameter changes -

  •  Sony camera settings - 
    • ISO == 100
    • Creative Style B&W
    • B&W Contrast to a test value - I've tried -3 to +1
    • Dynamic Range Optimization - Off or DROx where x == [1, 2, 3]
    • Meter to Spot
    • Output file == jpg 
    • Manual focus and defocus the lens as much as possible to fully blur the scene (wanting just tone, no texture) 
  • Using an evenly lit surface (piece of paper, wall, etc)...
  • Take two photos at 0EV and verify which 0EV setting gives exactly #76/118(dec) in the center (where the Spot meter metered) by measuring the tonal value using an image processing software on a computer.  This will be Zone 5 per definition.
    NOTE: Sony seems to offer two 0EV settings that are 0.3EV separated on their APS-C cameras.  I've found the system tells me when 0EV is reached, but then if I go 0.3EV further, the meter STILL reads 0EV.  Often the lower 0EV indicated is the one that matches the Zone 5 specification.  Then I use that value as the starting point and increase/decrease exposures using that as the reference/starting point.  Using the lighter 0EV value over-exposes by 0.3EV (as expected) even though it readss 0EV on the display.  In practice, some of my Sony cameras matrix meter for lower 0EV, while others meter for the upper 0EV.  I find this strange but it might fit in with whatever industry standards there are for metering (ie: +/- lee-way, or somesuch).  I've not (yet?) seen this on full frame Sony.
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 6 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 7 the tonal value as read on a computer 
  •  Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 8 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 9 the tonal value as read on a computer
    • Verify that this tonal value is exactly or very very nearly Pure White
  •  Returning to Zone 5/0EV... lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 4 the tonal value on a computer 
  •  Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 2 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 1 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 0 the tonal value on a computer - this should record as #00/00(decimal), Pure Black

In practice, older/early Sony mirrorless cameras only provide +/-3EV on the exposure wheel.  In these cases I use "M" (Manual) mode, set the aperture and ISO, then vary the shutter speed by 1EV up/down the test range.  On more recent cameras where +/-5EV is available on the I set the system to "S" (Shutter) mode, set the ISO, then vary the EV by 1EV using the exposure wheel.  Why Sony allows +5EV is beyond me, but that's a topic for another time (noting that +5EV is 1EV ABOVE completely and utterly saturated pure white). 

Default Creative Style Black and White as Dreck! ~

Sony Creative Style Black and White ~ Contrast = 0 

Note how the Creative Style Black and White curve in red
takes a dive below Zone 5/0EV.  This is what I think the
"cool kids" would call "crushing the blacks."  I find the
effect to be absolute dreck.  It should be noted that 
this was a creative decision taken by Sony some time 
back and there must've been valid reasons for doing
things this way. 


Notes On USE: In a practical sense I find Zones 3 through 7 to be the most important.  If those are as close to 1EV separated as possible, then I like the output.  This is very similar to what I experienced back in the film days.

For the shadow areas I find I prefer Zones 0 through 2 to be rather outside the 1EV separation definition.  This matches film curves more closely and since I'm used to that I like a certain combination of Contrast and DRO settings.

For the highlights I like to make them "sparkle" if I can.  I find I prefer Zone 8 to be pushing closer to Pure White than not.  Having just written that, however, I shot an entire series of in-camera generated images that pleased me using nothing but Contrast == -3.  So it's worth testing different combinations of Contrast and DRO to see what works best for oneself.

Saturday, August 23, 2025

Digital Zone System ~ Sony NEX-5T in-camera Black and White jpg generation

Default settings for Sony Creative Style Black and White produces dreck for as far as I can see.  My Quest, therefore, is to find a suitable solution for in-camera black and white jpg generation for those times when I wish to shoot in a mode of Polaroid instant images.

 

Sony Creative Style Black and White ~ Contrast = 0 

Note how the Creative Style Black and White curve in red
takes a dive below Zone 5/0EV.  This is what I think the
"cool kids" would call "crushing the blacks."  I find the
effect to be absolute dreck.  It should be noted that 
this was a creative decision taken by Sony some time 
back and there must've been valid reasons for doing
things this way. 

A year or two back I found an interesting almost all in-camera B&W solution using Creative Style Light.  The solution was decent as it placed the tonal values correctly along the line of the idealized Step Wedge, but images started out in color and needed to be converted to B&W after the fact.  The Quest continued and I tried to see if there was a way of getting the camera itself to produce a decent B&W image.

Letting the question sit in my mind and stew for awhile (months?  years?) additional settings modifications eventually bubbled to the surface.  This describes what I found. 

To set a reference to work against I used the old film-era Zone System definition. 

Zone System Definition ~

  • Zones are separated by 1 f-stop/1 Exposure Value (EV)
  • Zone 5 ~
    • old film days == 18% gray
    • digital tone value == #76(hexidecimal)/118(decimal)
  • Pure Black
    • old film days == Zone 0 at -5EV
    • digital tone values == -EV-whatever the camera system can deliver (commonly different between RAW - ideally -10EV!!!  and the in-camera jpg generator - Sony Creative Style Black and White in-camera seems set at -5EV)
  • Pure White
    • old film days == Zone 10 (last definition) or Zone 9 (earlier definition)
    • digital tone value == +4EV  as Zone 9 for the Sony cameras I own (this has been measured and is very important! to successfully using the Zone System in digital)

Digital Zone System In-Camera jpg Step Wedge generation ~ 

To evaluate in-camera jpg generation here's the method I used to create a Step Wedge that I could visually inspect to when making various in-camera parameter changes -

  •  Sony camera settings - 
    • ISO == 100
    • Creative Style B&W
    • B&W Contrast to a test value - I've tried -3 to +1
    • Dynamic Range Optimization - Off or DROx where x == [1, 2, 3]
    • Meter to Spot
    • Output file == jpg 
    • Manual focus and defocus the lens as much as possible to fully blur the scene (wanting just tone, no texture) 
  • Using an evenly lit surface (piece of paper, wall, etc)...
  • Take two photos at 0EV and verify which 0EV setting gives exactly #76/118(dec) in the center (where the Spot meter metered) by measuring the tonal value using an image processing software on a computer.  This will be Zone 5 per definition.
    NOTE: Sony seems to offer two 0EV settings that are 0.3EV separated on their APS-C cameras.  I've found the system tells me when 0EV is reached, but then if I go 0.3EV further, the meter STILL reads 0EV.  Often the lower 0EV indicated is the one that matches the Zone 5 specification.  Then I use that value as the starting point and increase/decrease exposures using that as the reference/starting point.  Using the lighter 0EV value over-exposes by 0.3EV (as expected) even though it readss 0EV on the display.  In practice, some of my Sony cameras matrix meter for lower 0EV, while others meter for the upper 0EV.  I find this strange but it might fit in with whatever industry standards there are for metering (ie: +/- lee-way, or somesuch).  I've not (yet?) seen this on full frame Sony.
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 6 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 7 the tonal value as read on a computer 
  •  Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 8 the tonal value as read on a computer 
  • Raise EV by 1EV
    • Take a photo
    • Measure and note as Zone 9 the tonal value as read on a computer
    • Verify that this tonal value is exactly or very very nearly Pure White
  •  Returning to Zone 5/0EV... lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 4 the tonal value on a computer 
  •  Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 3 the tonal value on a computer 
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 2 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 1 the tonal value on a computer
  • Lower the EV by 1EV
    • Take a photo
    • Measure and note as Zone 0 the tonal value on a computer - this should record as #00/00(decimal), Pure Black

In practice, older/early Sony mirrorless cameras only provide +/-3EV on the exposure wheel.  In these cases I use "M" (Manual) mode, set the aperture and ISO, then vary the shutter speed by 1EV up/down the test range.  On more recent cameras where +/-5EV is available on the I set the system to "S" (Shutter) mode, set the ISO, then vary the EV by 1EV using the exposure wheel.  Why Sony allows +5EV is beyond me, but that's a topic for another time (noting that +5EV is 1EV ABOVE completely and utterly saturated pure white). 

Sony NEX-5T ~

Using the above process and varying Creative Style Black and White Contrast as well as Dynamic Range Optimization (DRO), here's what I see.  The upper Step Wedge is the synthesized reference.

Zone System ~ Sony NEX5T Contrast 0 DRO 2

Zone System ~ Sony A6000 Contrast -1 DRO3

Zone System ~ Sony NEX5T Contrast -1 DRO 2

Zone System ~ Sony NEX5T Contrast -3 DRO 1 

Two things immediately occur to me.

  • Contrast changes highlights as well as shadows (this is really to be expected, right?)
  • DRO raises the dark tones up to Zone 5 to varying degrees depending on DRO "strength" ~ the effect is to "open the shadows" to varying degrees while doing _nothing_ to the highlights

In a practical sense I find Zones 3 through 7 to be the most important.  If those are as close to 1EV separated as possible, then I like the output.  This is very similar to what I experienced back in the film days.

For the shadow areas I find I prefer Zones 0 through 2 to be rather outside the 1EV separation definition.  This matches film curves more closely and since I'm used to that I like a certain combination of Contrast and DRO settings.

For the highlights I like to make them "sparkle" if I can.  I find I prefer Zone 8 to be pushing closer to Pure White than not.  Having just written that, however, I shot an entire series of in-camera generated images that pleased me using nothing but Contrast == -3.  So it's worth testing different combinations of Contrast and DRO to see what works best for oneself.

For the moment: Here's the recipe I've come to like when out and about photographing in old traditional 6:1 contrast ratio scenes:

  • Creative Style Black and White Contrast == 0 
  • Creative Style Black and White Sharp == +1 (on NEX-5T only - I've not talked about this here, so if there are questions, please ask) 
  • DRO == 1 - which is a rather decent dreck remover.  

Friday, August 22, 2025

Digital Zone System ~ setting the stage for an in-camera jpg recipe (Sony)

I realize I've written a fair bit about Digital Zone System RAW image processing, and then passed rather quickly to in-camera jpg generation without providing sufficient background to support my claims.  I would like to fill in a few of those blank spaces here.

To start, I would like to show how I got from RAW Digital Zone System processing to in-camera jpg generation by looking at the definition of the old film Zone System, applying that knowledge to creating and then modifying a Digital Zone System Step Wedge.  

I will share my in-camera jpg generated Step Wedge findings in future posts.

Zone System Definition ~

  • Zones are separated by 1 f-stop/1 exposure value (EV)
  • Zone 5 ~
    • old film days == 18% gray
    • digital tone value == #76(hexidecimal)/118(decimal)
  • Pure Black
    • old film days == Zone 0 at -5EV
    • digital tone values == whatever the camera system can deliver (potentially/commonly different between RAW and the in-camera jpg generator)
  • Pure White
    • old film days == Zone 10 (last definition) or Zone 9 (earlier definition)
    • digital tone value == +4EV  as Zone 9 for the Sony cameras I own (this has been measured and is very important! to properly using the Zone System in digital)

 Digital Zone System Step Wedge generation ~ 

To review how I generated a Digital Zone System Step Wedge -

  • Create a small Zone 5 reference image of pure #76/118dec tone value
  • Using an image processing software
    • raise the EV of the Zone 5 reference by 1 f-stop
      • measure and note the tone value as Zone 6 
    • raise the EV of the Zone 6 reference by 1 f-stop
      • measure and note the tone value as Zone 7 
    • raise the EV of the Zone 7 reference by 1 f-stop
      • measure and note the tone value as Zone 8
    • raise the EV of the Zone 8 reference by 1 f-stop
      • measure and note the tone value as Zone 9 <- pure white in the systems I use
    • lower the EV of the Zone 5 reference by 1 f-stop
      • measure and note the tone value as Zone 4 
    • lower the EV of the Zone 4 reference by 1 f-stop
      • measure and note the tone value as Zone 3
    • lower the EV of the Zone 3 reference by 1 f-stop
      • measure and note the tone value as Zone 2...
    • ... and continue this until the reference tonal patch image measures #00/00(dec) 

Digital Zone System ~ idealized Step Wedge ~

Using the method described above, here is a Step Wedge where each Zone step is exactly 1EV/1 f-stop.

Digital Zone System Step Wedge ~ 1 fstop Steps from +4EV to -5EV 

As can be seen, 1EV/1 f-stop tone separation continues to show measurable data below Zone 0/-5EV.  

Digital Zone System ~ modified to a 10 Zone Step Wedge ~

There's something I learned about the Sony Creative Style treats the tone curve that I'll come to in the next post.  To begin to account for this what I'm looking for here is a Step Wedge that retains good tonal separation from Zone 5/0EV down to Zone 0/-5EV, even if, in the end, Zones 0 through 4 do not exactly match the 1EV Zone System definition.

I suppose I should stop here a moment and talk a little about how old silver-halide film responded to the Zone System in the shadow areas.  The world was somewhat complex back in the day, and Zones 0 through 4 were _not_ exactly 1EV separated.  If you read some of the history of film you may come across tone curves that show how various film-types treated highlights and shadows.  

Zone 4 into Zone 3 was particularly interesting as film was not very sensitive to dark areas.  In fact, we used to say "expose for the shadows and develop for the highlights."  Bruce Barnham went so far as to redefine the Zone System for his purposes to say that Zone 4 was where shadow details should be put, not in Zone 3 like the System defines. 

So hold these thoughts and I'll come back to this in the next post. 

Using the Step Wedge from the prior step I anchored Zones 5 through 9, then using the "Curves" function, brought the pure black point to Zone 0/-5EV, re-measured the modified Step Wedge at each Zone.  Here's what that looks like.

Digital Zone System Step Wedge ~ Zone 0 as Pure Black

I will use this 10EV Digital Zone System Step Wedge as my reference in trying to sort out an in-camera jpg image processing solution for Sony's Creative Style Black and White nastiness.

Stay tuned.  Don't touch that dial.  We will be right back.  Or something like that. 

Monday, June 16, 2025

Chateau de Pierrefonds ~ a Digital Zone System Black and White adventure II

After reviewing my Vienna in-camera generated jpgs I went in search of a way to further refine my understanding of what is possible using Sony mirrorless cameras.  In this case I wanted to find a way to "brighten up" the highlights while keeping a sense of open shadows.

Château de Pierrefonds, France ~ 2025 

Sony A6000, Sigma 30mm f/2.8 EX DN E

  

Normally Sony Creative Style Black and White with Contrast set to 0 (default) pushes the dark values down too low for my tastes.  This is why I'd chosen Contrast = -3 for the trip to Vienna.  The highlights weren't "blown out" and the darks didn't sink into "inky yuck."  Yet the images felt that in some cases they could use a slightly different tonal range to more exactly match what I was looking for.

Keep in mind that I come from large format film days.  120 format was miniature.  35mm nearly Minox.  4x5inch sheet film was "normal."  8x10inch was glorious.  and 12x20inch film was almost "over the top."  In all cases I worked to keep a sense of "open shadows" and found processing/printing techniques to make 120 film format and larger "work" in this way. 

Château de Pierrefonds, France ~ 2025 

Sony NEX-7, Sigma 19mm f/2.8 EX DN E

  

I'm not sure how I got to asking the question, but I found myself trying to understand Sony's "Dynamic Range Optimization" feature.  It's something I've avoided using because I didn't understand it and because images I've made using DRO had too much of an HDR "look" to them. 

Considering the feature a little differently I learned that DRO levels are selectable (not just automatic as I'd wrongly assumed) with the intention of "opening up the shadow areas."  This was exactly what was desired.  So I performed a number of "characterizations" using the Sony Creative Style Black and White, setting contrast levels, and selecting specific DRO settings (avoiding DRO automation).

Château de Pierrefonds, France ~ 2025 

Sony NEX-7, Sigma 19mm f/2.8 EX DN E

  

Here's something that I found supremely useful for generating in-camera jpgs in a black and white style I like. 

  • Creative Style - Black and White
    • Contrast 0
    • Sharpness -3 (more about this below)
    • DRO 1 enabled <- this is the trick right here 
  • Expose -
    • Meter = Spot
    • Back-button AEL - Auto-Exposure Lock 
    • +2.7EV bright light areas (for 80% of the images I took) ... 
      or...
    • -2.3EV shadows (for photographing dark places - cathedral, tombs)
    • +/-0.3EV bracket for 3 exposures
  •  Technique -
    • Bright/Normal situations - 
      • +2.7EV exposure compensation (depending on how much texture I want to retain - remember Zone 8 / +3EV is "very light with a hint of texture" (edited 17 June 2025)
      • AEL the lightest area of a scene
      • Recompose
      • Release the shutter
      • Let the lower tones render as they will 
    • Dark situations -
      • -2.3EV exposure compensation
      • AEL area to be expressed as Zone 3
      • Recompose
      • Release the shutter 
      • Let the lighter tones render as they will
  • Digital Zone System details -
    • Zone 9 1/2 becomes pure white when using DRO 1
      • In fact, +3.7EV is the precise point where we go from luminescence value 247 (usable information in white) to 255 (pure white) at +4EV on Sony from NEX7 mirrorless model on...
    • Zones less than 3 often contain useful information (delivering that sense of "open shadows") 
Château de Pierrefonds, France ~ 2025 
 
Sony A6000, Sigma 30mm f/2.8 EX DN E
  
 
NOTE 1: DRO 1 raises Zone 5/0EV by exactly 0.3EV.  Zone 5 at -0.3EV is needed to compensate for the DRO 1 effect.
 
NOTE 2: Setting Zone 5 at -0.3EV when using DRO 1 expands the lightest Zones by 0.3EV.  Zone 9 1/3 / +4EV becomes pure white and thereby inching into Zone 10 film-era pure white definitions - in camera (edited 17 June, 2025)
 
NOTE 3: I find that _if_ I have time to properly meter a scene and find I need more contrast (due to a "flat" scene) that increasing this value in Creative Style Black and White brings the black point "in" and isn't all that "harsh" on the highlights (which I like to protect at the expense of the blacks if "push comes to shove").
 
NOTE 4: I like to use +/-0.3EV exposure bracketing since I seldom (or better said: never) have the time to fully meter a scene before hitting the shutter release and moving on to the "next thing."  
 
NOTE 5: Having a copy of the RAW output allows me to re-process images later, particularly if the in-camera generated jpg "isn't quite right."  Shooting RAW+jpg tends to chew up memory, but SD cards are cheap these days so I don't worry too much about it.
 
NOTE 6: Turning down Sharpness to -3 helps retain a certain sense of balance between sharpness and large format film style "smoothness."  The images seen here had sharpness set to +1.  Even when downsizing for the 'net, something doesn't "feel" entirely correct.  Later I tested different sharpness settings and found that the APS-C Sony sensors coupled with their in-camera jpg engine create something that feels much better to my way of "seeing" when Creative Style Black and White Sharpness is set to -3.
 
 
Château de Pierrefonds, France ~ 2025 
 
Sony A6000, Sigma 30mm f/2.8 EX DN E 
  

 

Sunday, June 08, 2025

Vienna ~ a Digital Zone System Black and White adventure

We needed to "get out of Dodge" for a few days so my wife and I visited Vienna.

Wien 2025 

I wanted to post images of our wanderings in near real time.  To do that I'd need to rely on the in-camera jpg processor since there was no way I'd be taking computer while on vacation.  I wanted to be out having fun and not sitting around the apartment processing RAW images.

Further, I had in mind shooting a film simulation recipe in the "big camera" that has a nice Zeiss zoom and shoot black and white in the "small" camera that has Sigma fixed focal length lens.  Things got off to a good start, but it was a rather/shockingly/absurdly large effort to download and post both the color film simulations and anything that happened to catch my eye in black and white.  Soon I realized I was very much enjoying exploring the city in black and white and decided to post works only in this style. 

A photographer friend says  "Photography is like music. You need good instruments, good technique, and, above all, artistry. When a picture sings, you've got it right!".

Palmenhaus Wien 2025 

Looking at the shear volume of images I was trying to share, I realized I was like that annoying kid with an artless kazoo marching around making all manner of noise. There was no peace.  There was no rest.  It was somewhat difficult to get it right! in camera, but there was no stopping me once I got rolling.

*snap*click*post*whee* goes the annoying kid with an ungovernable rude kazoo

After characterizing my Sony systems to adapt the old film Zone System of exposure (see St. Ansel, Brothers M.White and P.Davis, et al) for this trip I settled on the following process.

  • Creative Style - Black and White
    • Contrast -3
    • Sharpness +1
  • Expose -
    • Meter = Spot
    • Back-button AEL - Auto-Exposure Lock 
    • +2.5EV bright highlights (for 80% of the images I took) 
    • -2EV shadows (for photographing dark places - cathedral, tombs)
    • +/-0.5EV bracket - 3 or 5 exposures
  •  Technique -
    • Light/Normal situations - 
      • +2.5EV exposure compensation
      • AEL the lightest area of a scene
      • Recompose
      • Release the shutter
      • Let the lower tones render as they will 
    • Dark situations -
      • -2EV exposure compensation
      • AEL area to be expressed as Zone 3
      • Recompose
      • Release the shutter 
      • Let the lighter tones render as they will
  • Digital Zone System details -
    • Zone 9 is pure white (this is crucial: _not_ Zone 10 as defined for film)
      • In fact, +3.7EV is the precise point where we go from luminescence value 247 (usable information in white) to 255 at +4EV (pure white) (edited 17 June 2025)
    • Zones less than 3 often contain useful information (where film seldom ever did) 

Domkirche St. Stephan Wien 2025 

What I ended up with were minimally three exposures per image with 3 or 5 jpgs to choose from and post while on the road and 3 or 5 RAW to work on at my leisure after I returned home.  I "copped out" by bracketing because I seldom had the time to carefully meter a scene.  So off went the kazoo sending photons of light in three or five different directions with the hope something would "stick."

In general I think the approach "works."  I've only worked a handful of RAW images after the fact.  What I would like to do differently next time is to use 0.3EV bracketing in place of the rather coarse 0.5EV steps.  And I would like to see if I can make the highlights "sparkle" a bit better, while retaining a sense of "richness" of tone that comes with B&W contrast set to -3.

Kapuzinergruft - Wien 2025 

Tuesday, April 29, 2025

Software Intervention ~ Takumar 28mm f/3.5 SMC vs Sigma 24mm f/3.5 DG DN

One of the basic assumptions about lenses for photography that I have accepted unchallenged is that new lenses would be "obviously better" than old lenses.  My thinking was that modern optical design tools improve optical products in meaningful/useful ways leading to technically "better" photographs.

Images loaded into image processing software undergo many adjustments _before_ a starting image is displayed.  Some of these adjustments make optical defect "corrections."  Which made me wonder about the aforementioned optical design tools.

Turning software automation off often reveals an interesting, unexpected truth.  Modern lenses may _require_ software intervention to look good.  In many ways old manual focus lenses look better.  Old lenses often exhibit less geometric distortion, less chromatic aberration, and display certain level of "sharpness", even at wide apertures.  By comparison, some of the the modern lenses I own appear to benefit from a little software help.  

This little "discovery" lit up my brain cells and got me to thinking.  What if I applied lens corrections to manual focus lenses?  Specifically, what if I corrected for chromatic aberration and geometric distortion?  Not that old lenses need much geometric distortion correction, that is.  What effect might software intervention have on old lenses?

Post-Pandemic I found myself once again exploring manual focus optics.  Previously I'd made a decision to move to all modern AF but, it appears, an Old Itch still needed to be scratched.  I now have several beautiful Takumar, ever more Nikkors (including one particularly early SLR F-mount lens), Pentax-M, and third party Kiron.

Recently, I found myself in a favorite location and took two similar focal length lenses off to a car show. One lens was a new Sigma 24mm f/3.5 DG DN.  I really like this lens.  It's light, sharp, and the AF is blazing fast.  It has never let me down and is a jewel of an optic.

The other lens was an old c.1970's Asahi Takumar 28mm f/3.5 SMC (version 2).  It is a multi-coated 49mm filter thread later version of that focal length.  It, too, is very light, compact, very smooth focusing, and relatively quick and easy to use.  In fact, it, too, is a little jewel of a lens.

Setup ~ 

  • Sony A7RII set on a tripod 
  • 2 second self timer
  • ISO100 
  • Images shot at f/11

Image processing ~

Deployed four RawTherapee tools, starting from a "neutral" profile (thereby avoiding  automated software intervention) -

  • Demosaic 
  • Color management (Sony Camera "Standard" .dcp)
  • Automated Chromatic Aberration correction ~ RAW -> chromatic aberration
  • Capture Sharpen image sharpening ~ RAW -> Capture Sharpen (note: not USM)

Here is an example of what I see -

Takumar 28mm f/3.5 SMC vs Sigma 24mm f/3.5 DG DN i-Contemporary 

Comments ~

I once again confirm for myself that software intervention can be quite useful, regardless of the vintage of a lens.  In fact, old lenses tend to require less software intervention.

If I didn't already know which lens was which, there's no way I would be able to tell the difference between the old Takumar and the new Sigma.  Can you see any meaningful difference?  Maybe my eyes are getting old, but I can't.

While this is just one very small, minor example of what software intervention can do for images taken with old manual focus lens compared with modern AF .lcp enhanced optics, I see similar things with nearly all my old lenses. 

Thursday, April 24, 2025

Software Intervention ~ a few musings

Back when dinosaurs roamed the earth I photographed using film and printed my own black and white images.  For a short time (four years) I printed for various labs around southern California.  My colleagues and I were involved in various projects, including making limited edition runs of various things for different galleries and producing prints for exhibitions and portfolios of famous photographers.

Musée national de la Marine à Paris

I felt I had a good working knowledge of the requirements that met customer expectations.  To meet those requirements, our equipment and chemical processes were carefully controlled.  Our enlargers were carefully aligned (Omega D-series were easy compared with Beseler).  The enlarging lenses we used were the best we could find (EL-Nikkor, Schneider Componon-S). The chemicals were mixed in a consistent way and temperatures were carefully monitored.  We used densitometers to verify everything was as expected.  Lamps were left on to ensure constant temperatures in condenser enlarger heads and we waited a moment after putting a negative in carrier into the enlarger so the negative would snap into flatness (if it matters and you don't understand what I just said, ask and I'll try and explain a little further).  Global image contrast was controlled by selecting paper types and/or filters.  Local corrections were made using dodging/burning techniques.

We did all these things to make certain the field of film grain would be absolutely sharp from extreme corner to extreme corner across the entire print while working to reveal the subject/scene in all its potential glory.  Making good prints was a mixture of alchemy, art, and craft.

Digital image processing comes with a few more tools than what were available to us "back in the day."  Using these tools helps us to go beyond what was done in the Old Dinosaur Film Days. 

Musée national de la Marine à Paris

Mulling such things over in my mind, I thought it might be interesting to comment a little on the topic.  Here's a list of things we can do in digital to "improve" a basic image beyond film era global contrast and local dodging/burning.  We can now correct/control:

  • Optical distortion (pincushion, barrel)
  • Chromatic aberration
  • Optical vignetting (illumination fall-off around the edges)
  • "Sharpness"
  • "Local contrast" 

Here's a short list of the kinds of things that won't be corrected/controlled with neither film nor digital. 

  • Optical coma effects
  • Optical field curvature (field flatness)

There is (at least) one thing printing from film could do that is more than a little different in digital, and that is image enlarging.  Non-contact printed film sizes obviously require enlargement.  Digital is a different beast, though digital tools exist that enable enlargement possibilities.  I've found G'Mic's DCCI2X and CNN2X upscaling tools to be fairly convincing in taking a 42mpixel image and turning it into a 160+mpixel monster.

I've said a few things about how I feel I can make an old film-era lens look like a new digital-age one.  Using automated chromatic aberration correction and Capture Sharpen in RawTherapee takes my images a long ways toward matching the performance of my new digital AF Zeiss.  If an old lens suffers from lower contrast, a gentle Local Contrast and/or USM application finishes the job.

Musée national de la Marine à Paris

Taking the Insanity a little further, yesterday I downloaded a Leica Q2 .dng file and looked at it long and hard.  Given Leica's reputation I thought I might see some magic that's not commonly seen in other camera systems.  However, I wasn't "grokking" it, so I turned on/off the various software interventions... and... oh!... sure enough, image processing corrects/changes the outcome, even with hugely expensive Leica.

It's all rather exciting, actually.  Digital image processing software intervention can "democratize" image quality.  

Old lenses?  New lenses?  Apparent image "sharpness?"  On some level it's pretty much all the same.  Which is, I'm sure, partially the point some people try to make when saying things like "equipment doesn't matter."  Of course "equipment matters", but maybe not just in ways I usually think.

One Last Thought: There's something of a community of old lens user-commenters ("influencers?" - perish the thought) on various sites/platforms spouting/touting/sprouting the benefits of using old lenses.  They tend to say things like "old lenses have so much "character"..." and "modern lenses are so "clinically" sharp..." If what they want is "character" maybe they should try turning off software intervention on modern lenses and see what happens.  It might boggle/confuse/re-inform their world view.  Not that there's anything wrong with using old manual focus lenses, right?


Sunday, April 20, 2025

Software Intervention ~ chromatic aberration, capture sharpen, local contrast, and USM corrections on a Super Cheap Kiron 28mm f/2

In the prior post I looked at chromatic aberration and capture sharpen corrections on a beautiful old Nikon Nikkor-S 50mm f/1.4 c.1972 lens.  I then took a small step to see what controlling local contrast and adding a very light USM might have and found the old Nikkor could match (under many circumstances) the performance of a Sony 55mm f/1.8 FE ZA that was managed by the common and now customary lens correction profile (.lcp) file.

For this post I want to consider similar software interventions on an incredibly inexpensive Kiron 28mm f/2 as well as a cheap, widely available Pentax-M 28mm f/2.8.  Nobody seems to like these lenses and prices on the open market tend to reflect this thought. 

Setup ~ 

  • Sony A7 set on a tripod 
  • +1EV (because of the strong whites and knowing whites saturate at EV+3.5) 
  • 2 second self timer
  • ISO100 focusing on the central flower
  • Images made at f/2.8 and f/5.6
  • Processed in RawTherapee 
Voila! encore a mundane scene of my Rescue Orchid - 
 
Kiron 28mm f/2 Scene Setup
 
 Taking five processing steps and sharing the results in the following image -
  • Demosaic and only color management as the starting point
  • Add RAW -> chromatic aberration correction to the starting point
  • Add Capture Sharpen to chromatic aberration, demosaic, and color managed image
  • Add Rawtherapee -> Detail -> Local Contrast very light amplitude = 0.05
  • Add Rawtherapee -> Detail -> Sharpening USM

Kiron 28mm f/2 vs Pentax-M 28mm f/2.8 ~ software intervention

Comments ~

Well, well, well... would you have a look at that, will 'ya?  Incredible, isn't it?  Or, if you've become somewhat jaded to the whole exercise, like me: Huh.

Identifying the tools .lcp files use to correct modern AF lenses and then applying that knowledge to isolating and using similar tools on old manual focus lenses has shown me several things.

First, in surprisingly many ways, modern lenses require software intervention to look as good as they do.  Second, designers of earlier lenses, using by today's standards rather rudimentary calculations, were able to achieve decent performance in terms of field flatness, field distortions, and chromatic aberration.

While there may be little to nothing software can do to correct for field flatness, coma at wide apertures in high speed lenses, or resolution fall-off toward the edges of a field (such is commonly seen in early wide angle lenses at the extreme corners), software intervention seems to work wonders on old lenses in just about ever other way.

From my perspective there is nothing to fear from using old lenses.  To prove this point I may post a few images I've recently made to see if people can tell which lens made which image.  I know, I've played this game before, so we'll see.

If a person can't make a decent image, it's likely not the fault of the lens, regardless of the age of the optic.

Saturday, April 19, 2025

Chromatic Aberration ~ software intervention Nikon Nikkor-S 50mm f/1.4 vs Sony 55mm f/1.8 FE ZA

Now that I was on a roll looking at chromatic aberration and sharpness software tools I hauled out an old Nikon Nikkor 50mm f/1.4 c.1972 and a currently manufactured Sony 55mm f/1.8 FE ZA. 

What follows is actually the second pass that I made at this specific comparison.  I tried photographing the Rescue Orchid against strong backlight and found the Nikkor-S flares badly.  So I flipped the scene around and shot with the light coming from behind me.  Chromatic aberration was still present, so I was able to process the way I've learned works well.

Then I took two additional software tools and tried to match the output of the Nikkor-S to that of the Sony 55mm.  I wanted to confirm what I already suspected, which is to say, with a little help, old lenses image might be made to look every bit as good as new.

Setup ~ 

  • Sony A6300 set on a tripod 
  • +2EV (because of the strong whites and knowing whites saturate at EV+3.5) 
  • 2 second self timer
  • ISO100 focusing on the stick 
  • Images made at f/5.6 and f/11
  • Processed in RawTherapee 
Voila! encore a mundane scene of my Rescue Orchid - 
 
Scene for Nikkor S 50mm, Sony 55mm CA comparison
 
Three processing steps and sharing the results in the following image -
  • Demosaic and only color management as the starting point
  • Add RAW -> chromatic aberration correction to the starting point
  • Add Capture Sharpen to chromatic aberration, demosaic, and color managed image

Sony 55mm f/1.8 FE ZA, Nikon Nikkor S 50mm f/1.4 CA Comparison

Using  

  • Rawtherapee -> Detail -> Local Contrast 
  • Rawtherapee -> Detail -> Sharpening 
 I took a quick look at matching the Nikkor-S to the Sony FE.

Software Intervention comparison

 

Comments ~

As in prior comparisons I see that the automated chromatic aberration correction does a fine job here.  There's not much CA in the Sony FE, so this lens is easy on the CA tool.  There is a bit more CA in the Nikkor, but this, too, cleans up quickly and nicely.

The Nikkor-S has less local contrast and is a touch softer than the Sony FE after CA correction and Capture Sharpen.  Adding two tools, then gently nudging the local contrast and USM sharpness I was able to show myself that at f/5.6 and f/11 the Nikkor-S and Sony FE have little useful/important/visible difference between them.

 

Friday, April 18, 2025

Chromatic Aberration ~ software intervention Nikon Nikkor-P 10.5cm f/2.5 c.1959/1960

Once I sorted out how to apply chromatic aberration software corrections to old manual focus lenses I set about to have a look at a few of my oldest lenses, beginning with a well used, mostly clean glass Nikon Nikkor-P 10.5cm f/2.5 9 aperture blade "tick-mark" transition c.1959/1960 lens.

To review, here's how I enabled automated chromatic aberration correction in RawTherapee.

 Rawtherapee -> RAW -> Chromatic Aberration Correction -> select Auto-correction

Pretty simple, right?

Setup ~ 

  • Sony A6300 set on a tripod 
  • +1EV (because of the strong white back-light) 
  • 2 second self timer
  • ISO100 focusing on the stick 
  • Images made at f/2.5, f/4, f/5.6, and f/8
  • Processed in RawTherapee 
Voila! encore the mundane scene of my Rescue Orchid - 
 
Scene for Nikkor P 10.5cm f/2.5 CA comparison
 
I took three processing steps and share the results in the following image.
  • Demosaic and color management only as the starting point
  • Add RAW -> chromatic aberration correction to the starting point
  • Add Capture Sharpen to chromatic aberration, demosaic, and color managed image

Nikon Nikkor P 10.5cm CA comparison

Comments ~ 

There's not much to say.  It's obvious there is little CA in this lens.  It renders beautifully at all apertures.  Using chromatic aberration and "sharpness" software intervention on this optic feels like it brings this ancient lens right into line with modern products quite nicely.


Thursday, April 17, 2025

Chromatic Aberration ~ software intervention Nikkor, Pentax-M, Takumar

Looking at software intervention for correcting chromatic aberration in a new Sigma 24mm f/3.5 i-Contemporary lens and learning just how important (reliant?) lens correction profiles can be to image processing, I turned my attention to three old manual focus lenses to see what might be done for them.  The challenge is, of course, that there are no lens correction profiles (.lcp) files for old lenses.

Fortunately, RawTherapee provides a surprisingly complete set of tools to work with.  Opening this software I see a tool that might be useful for correcting chromatic aberration.

Rawtherapee -> Transform -> Chromatic Aberration Correction 

There are two sliders to work with and I can look at contrasty edges of a subject and use the tool to remove CA color tints.  I can then save the settings as a recipe and recall it later as needed.

Looking around the software a bit further I stumbled upon an automated method.

 Rawtherapee -> RAW -> Chromatic Aberration Correction -> select Auto-correction

This tool automatically detects and removes CA shortly after demosaicing an image.  This tool appears to operate earlier in image processing than the Transform CA tool.  All I need to do is save a single recipe with the RAW CA correction enabled and I no longer have to store individual lens recipes.  This is the tool I used in the following comparison.

Setup ~ 

  • Sony A6300 set on a tripod 
  • +1EV (because of the strong white back-light) 
  • 2 second self timer
  • ISO100 focusing on the stick 
  • Processed in RawTherapee 

I compared three old manual focus lenses ~

  • Nikon Nikkor 24mm f/2.8 Ai
  • Pentax-M 28mm f/2.8 
  • Takumar 28mm f/3.5 SMC (second version)
Voila! a mundane scene of my Rescue Orchid - 
 
Scene of CA investigations
 
In RawTherapee and for each of the three lenses I took three processing steps and share the results in the following image.
  • Demosaic and color management only as the starting point
  • Add RAW -> chromatic aberration correction to the starting point
  • Add Capture Sharpen to chromatic aberration, demosaic, and color managed image
Nikon Nikkor 24mm f/2.8 Ai CA processing
Pentax-M 28mm f/2.8 SMC CA processing
Takumar 28mm f/3.5 CA processing
 
Comments ~
 
RawTherapee's automated chromatic aberration correction tool works the treat.  It cleans up the CA tints and my impression is that an image becomes sharper in just this one simple step.  Then, with the addition of Capture Sharpen, images from old manual focus lenses can match their modern optical counterparts.
 
The old lenses I used here showed less CA than the Sigma 24mm I compared them against.  These lenses must be lighter on the tool to achieve similar results. Modern versus old?  At this level it doesn't seem to make much difference.  
 
My Nikon Nikkor 24mm f/2.8 Ai produces images that have felt "fat" to me.  I've often wondered about that.  Now I understand.  The "fatness" comes from un-corrected CA.  When the CA is cleaned up I doubt anyone could tell the difference between the old Nikkor and the new Sigma.  Images are "clinically" sharp after a little processing.
 
All hail software intervention.

Wednesday, April 16, 2025

Chromatic Aberrations ~ software intervention and a Sigma 24mm f/3.5 i-Contemporary

It was rather surprising to me that my Sigma 24mm f/3.5 i-Contemporary lens shows as much chromatic aberration as it does.
 
If I believed the Marketing Wizards I would've thought computer optimized optical design (such as what I was led to believe is used in current auto-focus lens design) would've been a vast improvement over earlier hand calculations (such as what was generally used to guide manual focus lens design).  Clearly this is not always the case.  There is something more going on.
 
Image processing software comes with lens correction profiles.  They correct for geometric distortion, vignetting, and chromatic aberration.  So I thought I'd have a look at how .lcp files modify the character of a currently manufactured lens.
 
I'm not sure if users can select individual corrections in RentWare products.  I imagine that people don't know nor care about the underlying automation.  In the case of RawTherapee, I _can_ select the corrections I want and I use this ability for this comparison.
 
Setup ~
  • Sony A6300 set on a tripod
  • +1EV (because of the strong white back-light)
  • 2 second self timer, ISO100
  • focusing on the stick
  • Processed in RawTherapee 
Voila! a mundane scene of my Rescue Orchid - 
 
Scene of CA investigations
 
In RawTherapee I took three processing steps and share the results in the following image.
  • Demosaic and color management only as the starting point
  • Add chromatic aberration correction to the starting point
  • Add Capture Sharpen to chromatic aberration, demosaic, and color managed image
Sigma 24mm f/3.5 i-Contemporary CA processing 
 
Comments ~
 
The effects of software intervention on image processing should be rather obvious.  My Sigma 24mm f/3.5 i-Contemporary lens goes from showing a lot of chromatic aberration to becoming a sharper looking image at the first step of software chromatic aberration control. Then adding Capture Sharpen and the image takes another leap in perceived "sharpness."  After applying just these two software tools the lens behaves very well.
 
Which raises another question: Are there any tools a person can use when shooting with old lenses?  Can software correct chromatic aberrations in old lenses that do not have lens correction profiles?  I will try to answer this in the next blog post.

Tuesday, April 15, 2025

Chromatic Aberrations ~ new vs old lenses

I'm not sure how it came to me, but I had a question of how chromatic aberrations might effect the appearance of "sharpness" in an image and took five lenses of relatively different vintages to have a look.

Software automation can correct for various optical "defects", including field distortion, chromatic aberrations (CA), and "sharpness."  As a first step for my comparison I would need to turn all of that off to note what just the lens was doing.

You see, I had the sneaking suspicion that modern lenses were being tweaked into fabulous goodness by lens correction profile, or .lcp, files that are often hidden from a user during RAW image processing, but I wasn't sure.  I'd heard over the years many marketing claims as to new lens design technologies improving all manner of traditional optical defects, so maybe the .lcp files weren't doing as much as I thought?

The lenses on hand included:

  • Nikon Nikkor 24mm f/2.8 Ai
  • Pentax-M 28mm f/2.8
  • Sigma 19mm f/2.8 EX DN E
  • Sigma 24mm f/3.5 i-Contemporary
  • Takumar 28mm f/3.5 SMC (second version)

Using a Sony A6300 set on a tripod, +1EV (because of the strong white back-light), 2 second self timer, ISO100, focusing on the stick, then processed in RawTherapee using only the demosaic and Camera Standard tone-curve enabled color management steps (to keep software processing to an absolute minimum).  

Voila! a mundane scene of my Rescue Orchid - 

Scene of CA investigations 

There were a few surprises awaiting me.  Looking for chromatic aberration, here's what I found  -

Comparing CA without processing intervention

Comments -

The Sigma 24mm f/3.5 shows the strongest chromatic aberrations of the five lenses I looked at whereas the old Pentax-M and older Takumar 28mm lenses show the best CA corrections.  Even the Nikkor 25mm appears to show less CA than the Sigma 24mm and is perhaps better at CA correction than the Sigma 19mm f/2.8 APS-C.

Looking at how CA effects the sense of "sharpness" I see that, yes, indeed, images look less "sharp" when CA is stronger.  Makes me wonder how much modern lenses rely on software intervention to make them look as good as they do?


Sunday, January 05, 2025

Countering the rising costs of photography ~ On Being A BottomFeeder

Thom Hogan has written an excellent article that observes and comments on the rising costs of photography and the sources of those costs.

Being the contrarian penny pincher that I am, I thought I'd give a few examples of how I no longer "play that game."  In fact, I've not "played that game" for decades.

When I had a job and could afford such things I would buy new pieces of camera equipment from time to time. The last new camera I bought was a Sony A6000, and that was well over ten years ago.  Though, thinking about it a moment, maybe the last new camera I bought was a Sony A5000.  The memory fades.

Most of my efforts however, even when I worked, were buying/using/selling used gear.  Hundreds and hundreds (more likely thousands) of lenses and cameras have passed through my hands over the years.  The habit carries forward into the present.

On the image processing side of things I leveraged my knowledge of and contacts with the Open Source community, and experiences of deploying large scale Linux systems.

So, my costs have been traditionally low.  I see no reason why someone truly interested in photography either as a hobby, artist, or working professional can't do something similar.

Musee d'Orsay, Paris ~ 2024

Sony A7RII, Sony FE 35mm f/2.8 ZA
RawTherapee, Digital Zone System
Pt/Pd tinted

Here are a few things I do.

Buy Used -

It seems like an obvious place to start. 

If I worried about reliability the thing I note is that most of my used cameras these days are very "low mileage."  One Sony A7 I bought had around 800 clicks on the shutter, looked well cared for, and set me back 450Euro five years ago.  Another had less than 2,000 clicks for a slightly lower price, again, five years ago.

On the other end of the spectrum, I recently picked up a Sony A7RII with 72,000 clicks for a nice low low price.  This, even though the camera remains in excellent condition and the shutter is rated for 500,000 clicks.

Similarly, used lenses can be attractively priced.  For less than the price of a new Sony A7III body (even on sale) I've been able to build an A7 kit with three fixed focal length lenses.  Two lenses are usually expensive Zeiss labeled and one is like new latest generation Sigma.  All are auto-focus, modern optics.

Thinking again about reliability, of all the used gear that's passed through my hands, there's not one single "bad deal" that I can recall. I take that back.  I bought a Fuji 240mm A f/9 large format lens many years ago that arrived with difficult to see sand-impacted front element.  It was returned for a full refund and the seller apologized.  He remembered he'd recently taken the lens to Death Valley where it had been windy.

Image Processing -

I tend not to spend too much on computers and stick to using a laptop.  Any decent quality device will do.  HP, Dell, and, hmmm... that's about it, actually.  For security reasons I assiduously avoid anything designed/manufactured/marketed by the Chinese.

Once an inexpensive computer is at hand, I wipe the disk and install a decent distribution of Linux.  That OS remains for me the most secure way of engaging the world.

On top of Linux I load the image processing applications I like.  These include RawTherapee, the Gimp, Luminance HDR, and Hugin.

I use RawTherapee for performing the "heavy lift" image processing.  When I need to "tweak" something or want work graphically I transition to the Gimp.  While I've not done a lot of HDR recently, I still low Luminance HDR, just in case.  When the bug hits and want to make my computer cry I use Hugin to stitch very large high resolution images.

Over the years I've paid close attention to differences between commercial and Open Source software capabilities.  What I've found is that Open Source software can be more complex and require more steps to accomplish common tasks.  Coming from commercial software where many potentially important details are hidden from users, Open Source software can be a little overwhelming at first.  

Part of the challenge is that there are so many options and tools and standards that is seems as if nothing is being left out.  However, and this is important to me, once I understood the tools and specifications implemented by those tools, I've come to realize there is nothing more flexible, more comprehensive, nor more accurate (in particular color management) than something like, say, RawTherapee for image processing. 

In fact, if I felt I couldn't live without Adobe "color science" or Fuji "film simulations" or Hasselblad "Natural Colors", all I'd have to do is load the .dcp and .icc files into RawTherapee and select the styles and looks I want during processing.

To back everything up, I buy new USB drives.  This is one thing I will not buy used.  New 5tb spin drives are shockingly inexpensive.  Solid State drives are becoming more affordable.  Everything, RAW files, processed images, documents, works in progress, everything, gets tossed onto a drive every so often.  And I'm tending to keep multiple backups, too, "just in case" something fails down stream.

That's just about it.  Very simple.  Very straight-forward.  Nothing fancy.  I don't pay rent on any software.  No Apple tax.  No Microsoft madness.  No Adobe rent until I die silliness.  I own my cameras and lenses outright and at as low a price as the market offers.  I don't get a boatload of noisy advertisements from the apps and OS I use.  My systems are secure, stable, extensible, and portable.

There you have it.  This is how I manage my photography eco-system costs while living on a fixed income.